ALUMINUM ASSOCIATION (AA)
AA DAF-45
(2003) Designation System for Aluminum
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
AAMA 101
(2002) Voluntary Specifications for
Aluminum, Vinyl (PVC) and Wood Windows and
Glass Doors
AAMA 2603
(2002) Voluntary Specification,
Performance Requirements and Test
Procedures for Pigmented Organic Coatings
on Aluminum Extrusions and Panels
AAMA 2604
(2002) Voluntary Specification,
Performance Requirements and Test
Procedures for High Performance Organic
Coatings on Aluminum Extrusions and Panels
ASTM INTERNATIONAL (ASTM)
ASTM D 1784
(2003) Rigid Poly(Vinyl Chloride) (PVC)
Compounds and Chlorinated Poly(Vinyl
Chloride) (CPVC) Compounds
ASTM D 3656
(2004) Insect Screening and Louver Cloth
Woven from Vinyl-Coated Glass Yarns
SCREEN MANUFACTURERS ASSOCIATION (SMA)
SMA 1004
(1987; R 1998) Aluminum Tubular Frame
Screens for Windows
WINDOW AND DOOR MANUFACTURERS ASSOCIATION (WDMA)
WDMA I.S. 4
(2000) Water-Repellent Preservative
Non-Pressure Treatment for Millwork
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
SECTION 08550
Page 4
Previous Page
