DELIVERY AND STORAGE

[

Controls; G]

[

For electrically operated system, submit wiring diagrams for

motor and controls.]

SD-08 Manufacturer's Instructions

Rolling service doors

[

Rolling fire doors]

Submit manufacturer's currently recommended installation

procedures for doors with the shop drawings.

SD-10 Operation and Maintenance Data

Rolling service doors, Data Package 2.

[

Rolling fire doors, Data Package 2.]

Submit in accordance with Section 01781 OPERATION AND

MAINTENANCE DATA. Include wiring diagrams.

1.3

DELIVERY AND STORAGE

Protect doors and accessories from damage during delivery, storage, and

handling. Clearly mark manufacturer's brand name. Store doors in dry

locations with adequate ventilation, free from dust and water, and in such

a manner as to permit access for inspection and handling. Handle doors

carefully to prevent damage. Remove damaged items that cannot be restored

to like-new condition and provide new items.

PART 2

PRODUCTS

2.1

ROLLING SERVICE DOORS

**************************************************************************

NOTE: Insert design wind load for the building if

greater than 0.96 kilopascals 20 PSF.

**************************************************************************

Shall be spring counterbalanced, rolling type, and shall be designed for

use on [exterior] [or] [interior] openings, as indicated. Doors shall be

operated [by means of lifting handles] [by hand chain with gear or sprocket

reduction] [by hand crank with gear or sprocket reduction] [by

electric-power with auxiliary hand chain operation]. Doors shall be

complete with guides, hardware, fastenings, operating mechanisms, and

accessories. Doors shall be surface-mounted type with guides at jambs set

back a sufficient distance to provide a clear opening when door is in open

position. Doors, hardware, and anchors shall be designed to withstand a

wind pressure of [0.96] [_____] kilopascals [20] [_____] pounds per square

foot of door area without damage. [Exterior doors shall be mounted [as

indicated] [on interior side of walls].] [Where service doors are

indicated to be chain- or crank-operated, the door design and construction

shall allow for future installation of electric-power operation.]

SECTION 08331N

Page 6