**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-08331N (February 2004)
------------------------------
Preparing Activity: NAVFAC
Superseding
UFGS-08331N (August 2001)
UNIFIED FACILITIES GUIDE SPECIFICATION
References are in agreement with UMRL dated 23 June 2005
Revised throughout - changes not indicated by CHG tags
**************************************************************************
SECTION 08331N
ROLLING SERVICE [AND FIRE] DOORS
02/04
**************************************************************************
NOTE: This guide specification covers the
requirements for rolling service doors, rolling fire
doors and minimum glazing requirements for
antiterrorism force protection (ATFP) in accordance
to UFC 4-010-01.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: On the drawings, show:
1.
Locations and sizes of door openings
2.
Side of wall where door is to be located
3.
Details of door openings and frames
4.
Method, type, and spacing of frame anchors
5. Electrical wiring, conduit, and devices for
motor-operated doors; power characteristics; and
location of controls
**************************************************************************
SECTION 08331N
Page 3
Previous Page
