basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM E 119
(2000a) Fire Tests of Building
Construction and Materials
ASTM E 1399
(1997; R 2000) Cyclic Movement and
Measuring the Minimum and Maximum Joint
Widths of Architectural Joint Systems
ASTM E 1966
(2001) Fire-Resistive Joint Systems
ASTM E 814
(2002) Fire Tests of Through-Penetration
Fire Stops
ASTM E 84
(2004) Surface Burning Characteristics of
Building Materials
FM GLOBAL (FM)
FM AS 4991
(2001) Approval of Firestop Contractors
FM P7825a
(2003) Approval Guide Fire Protection
UNDERWRITERS LABORATORIES (UL)
UL 1479
(2003) Fire Tests of Through-Penetration
Firestops
UL 2079
(2004) Tests for Fire Resistance of
Building Joint Systems
UL 723
(2003) Test for Surface Burning
Characteristics of Building Materials
UL Fire Resist Dir
(2004) Fire Resistance Directory
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
SECTION 07840
Page 3
Previous Page
