**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-07600 (June 2005)
------------------------------
Preparing Activity: NAVFAC
Superseding
UFGS 07600 (February 2004)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
Latest change indicated by CHG tags
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 07600
FLASHING AND SHEET METAL
06/05
**************************************************************************
NOTE: This guide specification covers the
requirements for flashing and sheet metal work
including gutters and downspouts, scuppers, splash
pans, and sheet metal roofing.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: The specified sheet metal roofing is the type
commonly used for on-site fabrication which does not
include factory fabricated or preformed metal
roofing. Preformed and Standing Seam metal roofing
is covered in other Division 7 sections. Gravity
roof ventilators, roof scuttles, louvers, and
similar items are not included. This guide
specification requires extensive editing when used
with single ply roof systems in order to assure
compatibility.
**************************************************************************
**************************************************************************
NOTE: Details of sheet metalwork will be shown on
project drawings in accordance with the appropriate
details in the Architectural Sheet Metal Manual of
the Sheet Metal and Air Conditioning Contractors
SECTION 07600
Page 4
Previous Page
