1. Slope: Provide slope toward drains (after
deflections due to applied load and creep) of not
less than one percent 10 millimeters (mm) per meter
1/8 inch per foot.
2. Wall Flashing: Extend wall flashing to at least
100 mm 4 inches above wearing surface and higher
where exposure is more severe. If top of flashing
is recessed under a concrete wall, counterflashing
is not necessary. Metal counterflashing is
necessary at masonry wall intersections. Flash
right-angle intersection of deck and wall with an
elastomeric sheet.
**************************************************************************
**************************************************************************
NOTE:
This section contains both metric and
inch-pound graphics.
NUMBER
TITLE
1
Basic Components of Membrane with Separate Wearing Course
2
Flashing at Cracks and Nonmoving Joints in the Concrete
3
Expansion Joint Flashing
4
Expansion Joint Flashing at Wall
5
Terminal Condition with Masonry Above Finish Wearing Surface
at Grade
6
Wall Flashing on Concrete Wall
7
Wall - Deck Flashing
8
Penetration Flashing
9
Drain Flashing
DO NOT INCLUDE THE SKETCHES OR LIST OF SKETCHES IN
THE PROJECT SPECIFICATIONS. USE SKETCHES FOR
PREPARING DETAILS ON THE DRAWINGS.
**************************************************************************
**************************************************************************
NOTE: TO DOWNLOAD UFGS GRAPHICS
Go to http://www.ccb.org/docs/ufgshome/graphtoc.pdf.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
SECTION 07141
Page 4
Previous Page
