**************************************************************************
NOTE:
On the drawings, show:
1. Extent of membrane waterproofing, substrates,
termination details,termination details, flashing,
and counterflashing, pipe and conduit penetrations,
and junctions at walls and floors.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM D 1004
(2003) Initial Tear Resistance of Plastic
Film and Sheeting
ASTM D 1149
(1999) Rubber Deterioration - Surface
Ozone Cracking in a Chamber
ASTM D 1204
(2002) Linear Dimensional Changes of
Nonrigid Thermoplastic Sheeting or Film at
Elevated Temperature
ASTM D 146
(2004) Sampling and Testing
Bitumen-Saturated Felts and Woven Fabrics
for Roofing and Waterproofing
ASTM D 2136
(2002) Coated Fabrics - Low-Temperature
Bend Test
ASTM D 2240
(2004) Rubber Property - Durometer Hardness
ASTM D 297
(1993; R 2002e1) Rubber Products -
ASTM D 3045
(1992; R 2003) Practice for Heat Aging of
Plastics Without Load
ASTM D 41
(1994; R 2000e1) Asphalt Primer Used in
Roofing, Dampproofing, and Waterproofing
ASTM D 412
(1998a; R 2002e1) Vulcanized Rubber and
Thermoplastic Elastomers - Tension
SECTION 07131
Page 4
Previous Page
