provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISI SG02-1
(2001) North American Specification for
the Design of Cold-Formed Steel Structural
Members
AMERICAN IRON AND STEEL INSTITUTE (AISI)
AISI SG-973
(1996) Cold-Formed Steel Design Manual
AMERICAN WELDING SOCIETY (AWS)
AWS D1.3
(1998) Structural Welding Code - Sheet
Steel
ASTM INTERNATIONAL (ASTM)
ASTM A 1008/A 1008M
(2004b) Steel Sheet, Cold-Rolled, Carbon,
Structural, High-Strength Low-Alloy and
High-Strength Low-Alloy with Improved
ASTM A 1011/A 1011M
(2004a) Steel, Sheet and Strip,
Hot-Rolled, Carbon, Structural, High
Strength Low-Alloy and High-Strength
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 370
(2003a) Mechanical Testing of Steel
Products
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM B 633
(1998e1) Electrodeposited Coatings of Zinc
on Iron and Steel
ASTM C 955
(2003) Load-Bearing (Transverse and Axial)
Steel Studs, Runners (Tracks), and Bracing
Gypsum Panel Products and Metal Plaster
Bases
SECTION 05400
Page 4