Section 01330 SUBMITTAL PROCEDURES:
SD-03 Product Data
Welding Procedure Qualifications[; G][; G, [_____]]
Welder, Welding Operator, and Tacker Qualification
Inspector Qualification
Previous Qualifications
Prequalified Procedures
Copies of the welding procedure specifications; the procedure
qualification test records; and the welder, welding operator, or
tacker qualification test records.
SD-06 Test Reports
Quality Control
A quality assurance plan and records of tests and inspections.
1.5
WELDING PROCEDURE QUALIFICATIONS
**************************************************************************
NOTE: Drawings or the text of the contract
specifications must specify the weld requirements:
tensile strength, elongation, shear strength, size,
length, type, and location.
When the proposed shielded metal-arc welding
procedures are reviewed, the voltage and travel
speed should be within the limits shown in the
following table:
Electrode
Voltage Limits
Travel Speed Limits
__________
________________
____________________
125 - 380 mm/minute
E6010
28
-
32
(5 - 15 inch/minute)
150 - 300 mm/minute
E6011
28
-
32
(6 - 12 inch/minute)
200 - 360 mm/minute
E6013
22
-
26
(8 - 14 inch/minute)
150 - 510 mm/minute
E7018
25
-
28
(6 - 20 inch/minute)
200 - 410 mm/minute
E7024
26
-
32
(8 - 16 inch/minute)
200 - 510 mm/minute
E8018
22
-
28
(8 - 20 inch/minute)
150 - 410 mm/minute
E11018
25
-
30
(6 - 16 inch/minute)
These limits are for 3.0 mm (1/8 inch) diameter
electrodes and the voltage will vary a small amount
SECTION 05090A
Page 7
Previous Page
