long by 4 feet high of each type of unit approved by the
Contracting Officer. Show the workmanship, bond, jointing, range
of color of units, and mortar color. Match workmanship of panels
throughout the project with that of the approved sample.
SD-07 Certificates
Ceramic Glazed Structural Clay Facing Tile
Prefaced Concrete Masonry Units
Certificates of compliance stating that the materials meet the
specified requirements.
1.3
DELIVERY, STORAGE, AND HANDLING
a.
Glazed structural clay tile and prefaced masonry shall be packed
in the manufacturer's standard paper cartons, trays, or shrink
wrapped pallets with a divider between each unit. Do not stack
pallets. Do not remove units from cartons until cartons are
placed on scaffolds or in the location where units are to be laid.
b.
Furnish packaged cementitious materials in bags displaying the
manufacturer's trademark and type. Material shall be dry and free
of lumps when delivered. Store material in dry, weathertight, and
properly ventilated structures. Different brands or types of
mortar shall be stored separately.
c.
Store and handle aggregates in a manner that will prevent
intermixing with foreign matter.
d.
Store anchors and ties in containers, in a dry and weathertight
structure.
PART 2
PRODUCTS
2.1
SHAPES AND TOLERANCES
a.
Provide units of shapes indicated or necessary for proper
installation. Unless indicated otherwise, vertical external
corners, sills, jambs, and caps shall be bullnosed; lintels and
internal corners shall be square. Bases shall be flush with the
wall surface above. Where base course only is provided, the base
shall be coved to ceramic tile or terrazzo floors.
b.
Provide manufactured bond beam and open end units where required
for placement of reinforcing.
2.2
CERAMIC GLAZED STRUCTURAL CLAY FACING TILE
**************************************************************************
NOTE: Give the designation of ceramic glazed
structural clay facing tile indicated on the project
drawings.
Specify Grade SS, Type I for walls laid in stack
bond; Grade S, Type I is supplied if nothing is
specified. Type II is double faced.
Normally, prefaced concrete masonry units will be
SECTION 04215
Page 6
Previous Page
