obtaining
the finish for the [_____] floors. Include qualification of
person to
be used for obtaining floor tolerance measurement, description
measuring
equipment to be used, and sketch showing lines and locations the
measuring
equipment will follow.
]1.6.3.5
Form Removal Schedule
Submit schedule for form removal indicating element and minimum length of
time for form removal.
][1.6.3.6
VOC Content for form release agents and curing compounds
Submit certification for the form release agent and curing compounds that
indicate the VOC content of each product.
][1.6.3.7
Submit Material Safety Data Sheets (MSDS) for all materials that are
regulated for hazardous health effects. Prominently post the MSDS at the
construction site.
]1.6.4
Test Reports
1.6.4.1
Concrete Mix Design
Submit copies of laboratory test reports showing that the mix has been
successfully tested to produce concrete with the properties specified and
that mix will be suitable for the job conditions. The laboratory test
reports shall include mill test and all other test for cement, [silica
fume,] aggregates, and admixtures. Provide maximum nominal aggregate size,
gradation analysis, percentage retained and passing sieve, and a graph of
percentage retained verses sieve size. Test reports shall be submitted
along with the concrete mix design. Obtain approval before concrete
placement.
1.6.4.2
Fly Ash and Pozzolan
Submit test results in accordance with ASTM C 618 for fly ash and pozzolan.
Submit test results performed within 6 months of submittal date.
1.6.4.3
Ground Iron Blast-Furnace Slag
Submit test results in accordance with ASTM C 989 for ground iron
blast-furnace slag. Submit test results performed within 6 months of
submittal date.
[1.6.4.4
Aggregates
**************************************************************************
NOTE: Require aggregate quality testing on large
concrete projects, where concrete is exposed to
seawater, alkali soils, moist conditions, or the
quality of the aggregates is questionable.
**************************************************************************
ASTM C 227 for potential alkali-silica reactions, ASTM C 295 for
petrographic analysis.
SECTION 03300N
Page 15
Previous Page
