Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-03 Product Data
Non-oxidizing metallic aggregate surface hardener
G
SD-04 Samples
Sample installation
Material sample
SD-07 Certificates
Statement of alternates G
1.2.1
Sample Installation
A minimum of 100 square feet of the [hangar] [______] floor slab shall be
finished in a location as directed by the Contracting Officer. Color,
texture and installation procedures are of prime importance. After
approval by the Contracting Officer, the Contractor shall maintain the same
controls and procedures throughout the installation process. Before
acceptance, all work will be compared to the sample area.
1.2.2
Material Sample
Samples of materials, color, and finish type shall be submitted to the
Contracting Officer for approval.
1.2.3
Alternates
Submittals for an alternate product shall contain the following from an
independent laboratory. Unit weight, abrasion resistance test in
accordance with COE CRD-C 52 and ASTM C 779/C 779M and percentage nominal
reflectivity utilizing IES LM-44. Any product submitted, whose warranty
contains a disclaimer limiting liability to the purchase price of the
material, will be disqualified.
1.3
DELIVERY AND STORAGE
Product shall be delivered in sealed moisture resistant packages. Protect
packages from damage. Store in an enclosed area. Contractor shall replace
damaged packages with new packages. Manufacturer's information regarding
date of manufacture, shelf life and date of purchase shall be provided no
later than the date delivered on site. Products shall be identifiable by
SECTION 03010N
Page 4
Previous Page
