][2.2.3
Off-Site Topsoil
Conform to requirements specified in paragraph entitled "Composition."
Additional topsoil shall be [furnished by the Contractor] [obtain from
topsoil borrow areas indicated].
]2.2.4
Composition
From 5 to 10 percent organic matter as determined by the topsoil
described in DOA SSIR 42. Maximum particle size, 19 mm 3/4 inch, with
maximum 3 percent retained on 6 mm 1/4 inch screen. The pH shall be tested
in accordance with ASTM D 4972. Topsoil shall be free of sticks, stones,
roots, and other debris and objectionable materials. Other components
shall conform to the following limits:
Silt
[25-50][7 to 17][_____] percent
Clay
[10-30][4 to 12][_____] percent
Sand
[20-35][70 to 82][_____] percent
pH
[5.5 to 7.0][_____]
Soluble Salts
[600] [_____] ppm maximum
2.3
SOIL CONDITIONERS
**************************************************************************
NOTE: Prior to including these provisions in
topsoil to determine its suitability and the
possible need of pH adjusters or soil conditioners.
**************************************************************************
Provide singly or in combination as required to meet specified requirements
for topsoil. Soil conditioners shall be nontoxic to plants.
2.3.1
Lime
**************************************************************************
NOTE: Use ASTM C 602 calcium carbonate equivalent
(C.C.E.) as specified in Table 1: for burnt lime,
C.C.E. shall not be less than 140 percent; for
hydrated lime, C.C.E. shall not be less than 110
percent; and for limestone, C.C.E. shall not be less
than 80 percent.
**************************************************************************
Commercial grade [hydrated] [or] [burnt] limestone containing a calcium
carbonate equivalent (C.C.E.) as specified in ASTM C 602 of not less than
[80][_____] percent.
2.3.2
Aluminum Sulfate
Commercial grade.
2.3.3
Sulfur
100 percent elemental
SECTION 02930
Page 15