Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Configuration
Scale drawings defining the revised play event configuration.
Shop Drawings
Scale drawings defining the revised use zone perimeters and play
event layout.
Fall Height
Scale drawings defining the revised depth or type of protective
surfacing.
Finished Grade and Underground Utilities
Finished grade, underground utilities, storm-drainage system and
irrigation system status; and location of underground utilities
and facilities.
SD-03 Product Data
Equipment
Manufacturer's descriptive data; catalog cuts; references; and
the latest edition of ASTM F 1487 and CPSC Pub No 325.
Manufacturer's specifications, handling and storage requirements,
installation procedures, and safety data sheets to include the
following: bare or painted metal platform and slide bed
orientation from the direct sun; warnings; and child safety
Equipment Identification
A list to include part numbers of furnished play event and
SECTION 02882
Page 9
Previous Page
