AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS
(AASHTO)
AASHTO HB-17
(2002) Standard Specifications for Highway
Bridges
AMERICAN WELDING SOCIETY (AWS)
AWS D1.1/D1.1M
(2004) Structural Welding Code - Steel
ASTM INTERNATIONAL (ASTM)
ASTM A 106/A 106M
(2004b) Seamless Carbon Steel Pipe for
High-Temperature Service
ASTM D 3034
(2004) Type PSM Poly(Vinyl Chloride) (PVC)
Sewer Pipe and Fittings
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 250
(2003) Enclosures for Electrical Equipment
(1000 Volts Maximum)
SOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE)
SAE J517
(2003) Hydraulic Hose
U.S. FEDERAL HIGHWAY ADMINISTRATION (FHWA)
FHWA SA-89-006
(1988) Manual on Uniform Traffic Control
Devices for Streets and Highways
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1910
Occupational Safety and Health Standards
UNDERWRITERS LABORATORIES (UL)
UL 486A-486B
(2003; Rev thru Apr 2004) Wire Connectors
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
SECTION 02840
Page 4
Previous Page
