shall be stored in a dry, covered area until installed.
1.6
INSPECTION
Protective surfacing material shall be inspected upon arrival at the job
site for meeting specified quality. Unacceptable materials shall be
removed from the job site.
1.7
MANUFACTURER'S QUALIFICATION
Protective surfacing should have been installed in a minimum 10 sites and
been in successful service for a minimum 5 year calendar period. The
manufacturer shall provide a Certificate of Insurance AA rated for a
minimum one million dollars covering both product and general liability.
1.8
INSTALLER'S QUALIFICATION
The installer shall be certified by the manufacturer for training and
experience installing the protective surfacing.
1.9
WARRANTY
Furnished protective surfacing shall have a minimum 1 year calendar period
warranty.
1.10
TECHNICAL REPRESENTATIVE
1.10.1
Playground Areas Other Than Child Development Centers (CDC)
The technical representative for outdoor play areas on sites other than
CDCs shall be the Director of Public Works or designated representative.
The design of these outdoor play areas shall be based on the play program
and the age groups to be accommodated as determined by the play area
committee.
1.10.2
Child Development Centers (CDC)
The technical representative for outdoor play areas at CDC shall be the
installation Child Development Services (CDS) Coordinator. The design of
the CDC outdoor play area shall be based on the developmental play program
for the age groups accommodated at the CDC. The play area is designed to
support the CDC program and to provide a stage set for creative play.
Developmental activities are selected which promote the intellectual,
social, emotional and physical growth of the children. The developmental
play program is developed by the MACOM CDS Director, installation CDS
Coordinator and CDC Director. They are responsible for the developmental
play program, child safety and accessibility to meet that program.
1.11
MANUFACTURER'S REPRESENTATIVE
The manufacturer's certified playground safety inspector or the
manufacturer's designated certified playground safety representative shall
supervise the installation and adjustment of the protective surfacing to
verify the installation meets the requirements of the manufacturer, this
specification, and paragraph CHILD SAFETY AND ACCESSIBILITY STANDARDS.
SECTION 02791
Page 11
Previous Page
