specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM C 136
(2004) Sieve Analysis of Fine and Coarse
Aggregates
ASTM D 1557
(2002e1) Laboratory Compaction
Characteristics of Soil Using Modified
Effort (56,000 ft-lbf/cu. ft. (2,700
kN-m/cu.m.))
ASTM D 2047
(2004) Static Coefficient of Friction of
Polish-Coated Floor Surfaces as Measured
by the James Machine
ASTM D 2261
(1996; R 2002) Tearing Strength of Fabrics
by the Tongue (Single Rip) Procedure
(Constant Rate-of-Extension Tensile
Testing Machine)
ASTM D 412
(1998a; R 2002e1) Vulcanized Rubber and
Thermoplastic Elastomers - Tension
ASTM D 6112
(1997) Compressive and Flexural Creep and
Creep-Rupture of Plastic Lumber and Shapes
ASTM D 648
(2004) Deflection Temperature of Plastics
Under Flexural Load in the Edgewise
Position
ASTM E 1912
(1998; R 2004) Accelerated Site
Characterization for Confirmed or
Suspected Petroleum Releases
ASTM F 1015
(2003) Relative Abrasiveness of Synthetic
Turf Playing Surfaces
ASTM F 1292
(2004) Impact Attenuation of Surface
Systems Under and Around Playground
Equipment
ASTM F 1487
(2001e1) Playground Equipment for Public
Use
CONSUMER PRODUCT SAFETY COMMISSION (CPSC)
CPSC Pub No 325
(1997) Handbook for Public Playground
Safety
1.2
DEFINITIONS
Critical Height: The fall height at which the protective surfacing meets
the requirements of ASTM F 1292.
SECTION 02791
Page 5
Previous Page
