ACI INTERNATIONAL (ACI)
ACI 301
(1999) Specifications for Structural
Concrete for Buildings
ASTM INTERNATIONAL (ASTM)
ASTM C 117
(2004) Materials Finer Than 75 micrometer
(No. 200) Sieve in Mineral Aggregates by
Washing
ASTM C 131
(2003) Resistance to Degradation of
Small-Size Coarse Aggregate by Abrasion
and Impact in the Los Angeles Machine
ASTM C 136
(2004) Sieve Analysis of Fine and Coarse
Aggregates
ASTM C 67
(2003a) Sampling and Testing Brick and
Structural Clay Tile
ASTM C 936
(2001) Solid Concrete Interlocking Paving
Units
ASTM C 979
(1999) Pigments for Integrally Colored
Concrete
ASTM D 1760
(2001) Pressure Treatment of Timber
Products
ASTM D 4318
(2000) Liquid Limit, Plastic Limit, and
Plasticity Index of Soils
ASTM D 75
(2003) Sampling Aggregates
ASTM E 11
(2004) Wire Cloth and Sieves for Testing
Purposes
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
context of the project.
For submittals requiring Government approval on Army
projects, a code of up to three characters within
the submittal tags may be used following the "G"
SECTION 02780
Page 4
Previous Page
