Submit shop drawings.
SD-03 Product Data
Well Screen[; G][; G, [_____]]
Before installation, all well screen shall be approved.
Filter Pack[; G][; G, [_____]]
The filter pack material and its gradation shall be approved
before it is placed.
Cement Grout Mixture Proportion[; G][; G, [_____]]
Submit the cement grout mixture proportion to be used in
plugging abandoned wells.
SD-06 Test Reports
Tests
Submit sampling and testing reports for each relief well, logs
of the borings, well screen and riser pipe, backfill material, and
pump tests. Register each well with the state as required by the
state in which the well is installed.
1.4
REGULATORY REQUIREMENTS
**************************************************************************
NOTE: The Designer should select and/or insert the
applicable obligations for compliance with specific
code requirements of public authorities at the state
and/or local level. Guidance is given in memorandum
from CECW-EG, "State Regulation of Subsurface
Drilling Activities", dated 21 February 91.
**************************************************************************
The [state statutory and regulatory] [_____] requirements listed below form
a part of this specification to the extent referenced.
[_____]
1.5
PROJECT/SITE CONDITIONS
1.5.1
Shop Drawings
The shop drawings shall present details of the Contractor's methods for
drilling, coupling well screen and riser sections together, placement of
centralizers, installing the well screen and riser, and limit(s) of
backfilling. The shop drawings shall show the type of screen and size;
[perforation size] [or] [slot size], shape and pattern; [bottom plug]
[tailpipe] material; and installation detail. The riser pipe, check
valve(s) and well discharge details shall also be shown on the shop
drawings. Any contractor-proposed substitutes or alternates in material
construction details or methods must be presented in the shop drawings. No
phase of the work shall be initiated until all shop drawings concerning
that activity have been approved.
SECTION 02525A
Page 9