**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WOOD-PRESERVERS' ASSOCIATION (AWPA)
AWPA C1
(2000) All Timber Products - Preservative
Treatment by Pressure Processes
AWPA C3
(1999) Piles - Preservative Treatment by
Pressure Processes
AWPA M4
(2001) Standard for the Care of
Preservative-Treated Wood Products
AWPA M6
(1996) Brands Used on Forest Products
ASTM INTERNATIONAL (ASTM)
ASTM D 1143
(1981; R 1994e1) Piles Under Static Axial
Compressive Load
ASTM D 25
(1999e1) Round Timber Piles
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS RR-S-331
(Rev D) Shoes: For Wood Piles
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
complex and can be reviewed through the Contractor's
Quality Control system. Only add a "G" if the
submittal is sufficiently important or complex in
SECTION 02458N
Page 3
Previous Page
