**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN WOOD-PRESERVERS' ASSOCIATION (AWPA)
AWPA C2
(2001) Lumber, Timber, Bridge Ties and
Mine Ties - Preservative Treatment by
Pressure Processes
AWPA M4
(2001) Standard for the Care of
Preservative-Treated Wood Products
AWPA M6
(1996) Brands Used on Forest Products
AWPA P2
(2001) Standard for Creosote Solutions
AWPA P5
(2002) Standard for Waterborne
Preservatives
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 307
(2004) Carbon Steel Bolts and Studs, 60
000 PSI Tensile Strength
U.S. DEPARTMENT OF DEFENSE (DOD)
(RevB; Notice 2) Paint, High Zinc Dust
Content, Galvanizing Repair (Metric)
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS RR-W-410
(Rev E) Wire Rope and Strand
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
SECTION 02398
Page 4
Previous Page
