**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-02115A (February 2002)
---------------------------
Preparing Activity: USACE
Superseding
UFGS-02115A (December 1997)
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
Latest change indicated by CHG tags
**************************************************************************
SECTION 02115A
UNDERGROUND STORAGE TANK REMOVAL
02/02
**************************************************************************
NOTE: This guide specification covers the
requirements for removal and disposal of
underground, nonhardened tanks used to store
petroleum products, waste oils or hazardous wastes.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
PART 1
GENERAL
**************************************************************************
NOTE: The following information should be shown on
the project drawings:
(1) Overall installation plan which identifies
tanks; borrow, disposal, and stockpile areas;
special security areas; shoring requirements; and
access routes.
(2) Individual as-built site plans of tank
locations which identify site features such as
buildings, roads, utilities, topography, trees and
shrubs, surface condition, etc. If as-built
drawings are not available, a site investigation and
site plans are required to show the general location
SECTION 02115A
Page 3
Previous Page
