PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI S3.2
(1989; R 1999) Method for Measuring the
Intelligibility of Speech Over
Communication Systems (ASA 85)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C62.41
(1991; R 1995) Recommended Practice for
Surge Voltages in Low-Voltage AC Power
Circuits
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
UNDERWRITERS LABORATORIES (UL)
UL 50
(1995; Rev thru Sep 2003) Enclosures for
Electrical Equipment
UL 6
(2000; Rev thru May 2003) Rigid Metal
Conduit
UL 797
(2004) Electrical Metallic Tubing -- Steel
1.2
RELATED REQUIREMENTS
Section 16050N BASIC ELECTRICAL MATERIALS AND METHODS, applies to this
section, with the additions and modifications specified herein.
1.3
SYSTEM DESCRIPTION
**************************************************************************
NOTE: Delete paragraph and subparagraph if Type 4
or 5 is specified.
**************************************************************************
1.3.1
Performance Requirement for Type [1] [2] [3] System
Solid state, modular in design, and shall be of the [wired] [and]
[wireless] type with [all master stations] [a single master with remote
SECTION 16822N
Page 5
Previous Page
