1.3.5
Spare Parts
The Contractor shall submit spare parts data for each different item of
material and equipment specified, after approval of the detail drawings and
not later than [2] [_____] months prior to the date of beneficial
occupancy. The data shall include a complete list of parts and supplies,
with current unit prices and source of supply.
1.4
DELIVERY AND STORAGE
Equipment placed in storage until installation shall be stored with
protection from the weather, humidity and temperature variations, dirt and
dust, and other contaminants.
1.5
VERIFICATION OF DIMENSIONS
The Contractor shall become familiar with the details of the work and
working conditions, shall verify dimensions in the field, and shall advise
the Contracting Officer of any discrepancies before performing the work.
PART 2
PRODUCTS
2.1
STANDARD PRODUCTS
Material and equipment to be provided shall be the standard products of a
manufacturer regularly engaged in the manufacture of such products, and
shall essentially duplicate material and equipment that have been in
satisfactory use at least 2 years. All components used in the system shall
be commercial designs that comply with the requirements specified.
Equipment shall be supported by a service organization that is within
[_____] miles of the site.
2.1.1
Identical Items
Items of the same classification shall be identical. This requirement
includes equipment, modules, assemblies, parts, and components.
2.1.2
Nameplates
Each major component of equipment shall have the manufacturer's name,
address, model and catalog number, and serial number on a plate secured to
the equipment.
2.2
MIXER-PREAMPLIFIER
**************************************************************************
NOTE: Verify that the designated number of inputs
are sufficient to meet the requirements of the
design and increase the number of inputs if required.
Consideration should be given to the use of a
mixer-amplifier instead of a
mixer-preamplifier/power-amplifier combination.
Mixer-amplifiers may not be available for power
outputs of 200 watts or greater.
**************************************************************************
Mixer-preamplifier shall as a minimum conform to the following
specifications:
SECTION 16770
Page 7
Previous Page
