3.8.10
Temporary Wireless Nurse Call Systems
**************************************************************************
NOTE: If the system is a replacement for an
existing system in existing facilities where ongoing
patient care is to remain operational during the
replacement installation, then include this
paragraph.
**************************************************************************
Provide temporary wireless nurse call systems as required to keep the nurse
call function operating in patient care areas during phased installation
activities.
3.8.11
Zone Lights Activation Matrices
**************************************************************************
NOTE: Prepare and add a Zone Light Activation
Matrix as noted below for each NC Subsystem. An
example matrix is shown.
**************************************************************************
On the telecommunications plan drawings each Zone Light is identified by an
ID Number (#). Each Zone Light shall be programmed to indicate calls
originating from the patient care Calling Rooms as defined below in the
Zone Lights Activation Matrix for each NC Subsystem serving a patient care
area. In the following Table the "X" relates each Zone Light with the
calling rooms from which calls shall be indicated on the Zone Light.
ZONE LIGHTS ACTIVATION MATRIX
NC SUBSYSTEM NO. 01: [PRIMARY CARE CLINIC] [EXAMPLE]
CALLING
ZONE LIGHTS
ROOM
ID #
101
102
103
104
105
106
107
RM #
108-03
115-13
115-13
121-01
121-01
116-08
121-01
108-01
X
X
X
108-02
115-01
X
X
X
X
115-02
121-02
X
X
X
121-03
117-31
X
X
X
X
-- End of Section --
SECTION 16730A
Page 47
Previous Page
