on Iron and Steel Products
ASTM A 153/A 153M
(2004) Zinc Coating (Hot-Dip) on Iron and
Steel Hardware
ASTM A 780
(2001) Repair of Damaged and Uncoated
Areas of Hot-Dipped Galvanized Coatings
ASTM B 117
(2002) Operating Salt Spray (Fog) Apparatus
ASTM D 1248
(2004) Polyethylene Plastics Extrusion
Materials for Wire and Cable
ASTM D 1654
(1992; R 2000) Evaluation of Painted or
Coated Specimens Subjected to Corrosive
Environments
ASTM D 709
(2001) Laminated Thermosetting Materials
FM GLOBAL (FM)
FM P7825a
(2003) Approval Guide Fire Protection
FM P7825b
(2003) Approval Guide Electrical Equipment
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C2
(2002) National Electrical Safety Code
IEEE C62.11
(1999) Metal-Oxide Surge Arresters for
Alternating Current Power Circuits (>1KV)
IEEE C62.41
(1991; R 1995) Recommended Practice for
Surge Voltages in Low-Voltage AC Power
Circuits
IEEE Std 48
(1996; R 2003) Test Procedures and
Requirements for Alternating-Current Cable
Terminations 2.5 kV through 765 kV
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 250
(2003) Enclosures for Electrical Equipment
(1000 Volts Maximum)
NEMA AB 1
(2002) Molded-Case Circuit Breakers,
Molded Case Switches, and Circuit-Breaker
Enclosures
NEMA ICS 2
(2000; R
2004) Industrial Controls and
Systems:
Controllers, Contactors, and
Overload
Relays Rated Not More than 2000
Volts AC
or 750 Volts DC
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
NEMA PB 1
(2000) Panelboards
SECTION 16525A
Page 6
Previous Page
