re-transfer time delay.
b.
Lamps for indicating connected source and normal/preferred source is
available.
c.
Auxiliary contacts for indicating connected source and normal/preferred
source available.
**************************************************************************
NOTE: Select option for preferred source selector
switch when specifying preferred utility source
automatic transfer switches.
**************************************************************************
[d.
Source selector switch with the following positions and associated
functions.
1.
Source 1 - Selects Source 1 as the source to which the automatic
transfer switch will transfer if that source is available.
2.
Source 2 - Selects source 2 as the source to which the automatic
transfer switch will transfer if that source is available.]
**************************************************************************
NOTE: Select the following option when specifying
by-pass/isolation switches.
**************************************************************************
[e.
Lamps for indicating that the by-pass/isolation switch is in the
"normal by-pass", "alternate by-pass", or "isolated" position.
]PART 3
EXECUTION
3.1
INSTALLATION
Installation shall conform to the requirements of NFPA 70 and
manufacturer's recommendation.
3.2
PREREQUISITES FOR FUNCTIONAL ACCEPTANCE TESTING
Completion of the following requirements is mandatory prior to scheduling
functional acceptance tests for the automatic transfer switch.
3.2.1
Performance of Acceptance Checks and tests
Complete as specified in paragraph entitled "Acceptance Checks and Tests".
The Acceptance Checks and Tests shall be accomplished by the Testing
organization as described in Section 16081 APPARATUS INSPECTION AND TESTING.
3.2.2
Manufacturers O&M Information
The manufacturers O&M information required by the paragraph entitled "SD-10
Operation and Maintenance Data", shall have been submitted to and approved
by the Contracting Officer.
3.2.3
Test Equipment
All test equipment and instruments shall be on hand prior to scheduling
field tests, or subject to Contracting Officer's approval, evidence shall
SECTION 16410N
Page 10
Previous Page
