The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C12.1
(2001) Electric Meters Code for
Electricity Metering
ANSI C12.10
(1997) Watthour Meters
ANSI C12.11
(1987) Instrument Transformers for Revenue
Metering, 10 kV BIL through 350 kV BIL
(0.6 kV NSV through 69 kV NSV)
ANSI C12.4
(1984; R 1990) Mechanical Demand Registers
ASME INTERNATIONAL (ASME)
ASME B1.1
(2001; R 2003) Unified Inch Screw Threads
(UN and UNR Thread Form)
ASME B1.20.1
(1983; R 2001) Pipe Threads, General
Purpose, Inch
ASTM INTERNATIONAL (ASTM)
ASTM B 187/B 187M
(2003) Copper, Bus Bar, Rod and Shapes and
General Purpose Rod, Bar and Shapes
ASTM B 317/B 317M
(2002) Aluminum-Alloy Extruded Bar, Rod,
Tube, Pipe, and Structural Profiles for
Electrical Purposes (Bus Conductor)
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
IEEE C57.13
(1993; R 2003) Standard Requirements for
Instrument Transformers
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA AB 1
(2002) Molded-Case Circuit Breakers,
Molded Case Switches, and Circuit-Breaker
Enclosures
NEMA ICS 1
(2000) Industrial Control and Systems:
General Requirements
NEMA ICS 2
(2000; R
2004) Industrial Controls and
Systems:
Controllers, Contactors, and
Overload
Relays Rated Not More than 2000
Volts AC
or 750 Volts DC
NEMA ICS 4
(2000) Industrial Control and Systems:
Terminal Blocks
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
SECTION 16403A
Page 6
Previous Page
