AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C12.1
(2001) Electric Meters Code for
Electricity Metering
ANSI C12.10
(1997) Watthour Meters
ANSI C12.11
(1987) Instrument Transformers for Revenue
Metering, 10 kV BIL through 350 kV BIL
(0.6 kV NSV through 69 kV NSV)
ANSI C12.4
(1984; R 1990) Mechanical Demand Registers
ANSI C135.30
(1988) Zinc-Coated Ferrous Ground Rods for
Overhead or Underground Line Construction
ANSI C29.1
(1988; R 2002) Test Methods for Electrical
Power Insulators
ANSI C29.2
(1992; R 1999) Insulators - Wet-Process
Porcelain and Toughened Glass - Suspension
Type
ANSI C29.9
(1983; R 2002) Wet-Process Porcelain
Insulators - Apparatus, Post-Type
ANSI C37.06
(2000) AC High-Voltage Circuit Breakers
Rated on a Symmetrical Current Basis -
Preferred Ratings and Related Required
Capabilities
ANSI C37.121
(1989) Switchgear Unit Substations
Requirements
ANSI C37.16
(2000) Low-Voltage Power Circuit Breakers
and AC Power Circuit Protectors -
Preferred Ratings, Related Requirements,
and Application Recommendations
ANSI C37.32
(2002) High-Voltage Switches, Bus
Supports, and Accessories - Schedules of
Preferred Ratings, Construction Guidelines
and Specifications
ANSI C37.46
(2000) For High Voltage Expulsion and
Current-Limiting Type Power Class Fuses
and Fuse Disconnecting Switches
ANSI C39.1
(1981; R 1992) Requirements for Electrical
Analog Indicating Instruments
ANSI C42.100
(2000) Standard Dictionary of Electrical
and Electronics Terms
ANSI C57.12.10
(1997) Safety Requirements for
Transformers 230 kV and Below 833/958
Through 8333/10417 kVA, Single-Phase, and
750/862 Through 60 000/80 000/ 100 000
kVA, Three-Phase Without Load Tap
SECTION 16311A
Page 7
Previous Page
