dB rating of 65 dB or lower. UPS modules rated
above 125 kVA should have a dB rating of 75 dB or
lower.
**************************************************************************
Sound pressure levels produced by the UPS, when operating under full rated
load, at a distance of [1.5 m 5 feet] [_____] in any direction from the
perimeter of the unit, shall not exceed [75] [_____] dB as measured on the
A scale of a standard sound level meter at slow response.
1.6.3
Verification of Dimensions
The Contractor shall become familiar with details of the work, verify
dimensions in the field, and shall advise the Contracting Officer of any
discrepancy before performing the work.
1.7
NAME PLATES
Each major item of equipment shall have the manufacturer's name, address,
type or style, model or serial number, and catalog number on a plate
secured to the item of equipment.
1.8
SPECIAL TOOLS
One set of special tools, calibration devices, and instruments required for
operation, calibration, and maintenance of the equipment shall be provided.
1.9
OPERATION AND MAINTENANCE MANUALS
[Six] [_____] complete copies of operation manuals for the UPS System
outlining the step-by-step procedures required for system startup,
operation and shutdown shall be provided. The instructions shall include
the manufacturer's name, equipment model number, service manual, parts
list, and brief description of equipment and its basic operational
features. [Six] [_____] complete copies of maintenance manuals listing
routine maintenance procedures, possible breakdowns and repairs, and
troubleshooting guides shall be provided. Corrective maintenance
procedures shall identify the most probable failures and the appropriate
repairs. Test measurement levels shall be referenced to specific test
points on the installed equipment. Operation and maintenance manuals may
be either combined or separate.
1.10
SPARE PARTS
The Contractor shall submit spare parts data for each different item of
material and equipment specified, not later than the date of beneficial
occupancy. The data shall include a complete list of parts and supplies
with current unit prices and source of supply and an itemized price
breakdown of spare parts recommended for stocking. The recommended spare
parts selected shall be those which, in the manufacturer's judgment, will
be involved in the majority of maintenance difficulties encountered.
PART 2
PRODUCTS
2.1
STANDARD PRODUCTS
Materials and equipment shall be the standard products of a manufacturer
regularly engaged in the manufacture of such products and shall essentially
duplicate items that have been in satisfactory use for at least 2 years
SECTION 16265A
Page 14
Previous Page
