PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL(AMCA)
AMCA 500-D
(1998) Laboratory Methods of Testing
Dampers for Rating
AMCA 501
(2003) Application Manual for Air Louvers
ASTM INTERNATIONAL (ASTM)
ASTM A 167
(2004) Stainless and Heat-Resisting
Chromium-Nickel Steel Plate, Sheet, and
Strip
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM B 152/B 152M
(2000) Copper Sheet, Strip, Plate, and
Rolled Bar
ASTM B 209
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate
ASTM B 209M
(2004) Aluminum and Aluminum-Alloy Sheet
and Plate (Metric)
ASTM C 1071
(2000) Fibrous Glass Duct Lining
Insulation (Thermal and Sound Absorbing
Material)
ASTM C 423
(2002a) Sound Absorption and Sound
Absorption Coefficients by the
Reverberation Room Method
ASTM C 553
(2002) Mineral Fiber Blanket Thermal
Insulation for Commercial and Industrial
Applications
ASTM E 437
(1992; R 1997) Industrial Wire Cloth and
Screens (Square Opening Series)
ASTM E 90
(2004) Laboratory Measurement of Airborne
SECTION 15810N
Page 5
Previous Page
