U.S. GENERAL SERVICES ADMINISTRATION (GSA)
FS A-A-1556
(Rev A) Sealing Compound (Elastomeric
Joint Sealant)
FS A-A-272
(Rev A, Notice 2) Caulking Compounds
FS TT-S-001543
(Rev A) Sealing Compound: Silicone Rubber
Base (For Calking, Sealing, and Glazing in
Buildings and Other Structures)
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1910.219
Mechanical Power Transmission Apparatus
UNDERWRITERS LABORATORIES (UL)
UL 181
(2005) Factory-Made Air Ducts and Air
Connectors
UL 214
(1997; Rev thru Aug 2001) Tests for
Flame-Propagation of Fabrics and Films
UL 33
(2003; Rev thru Feb 2004) Heat Responsive
Links for Fire-Protection Service
UL Bld Mat Dir
(2004) Building Materials Directory
1.2
GENERAL REQUIREMENTS
1.2.1
SMACNA Duct Construction Manuals
The recommendations in the Sheet Metal and Air Conditioning Contractors'
National Association (SMACNA) duct construction manuals shall be considered
mandatory requirements. Substitute the word "shall" for "should" in these
manuals.
1.2.2
Fan Data
[For fans include fan curves or rating tables and derating factors.]
Provide certified performance curves showing total pressure, power, and
mechanical efficiency versus flow rate of the operating density and fan
speed. All areas of unstable operation shall be indicated. For fans
equipped with adjustable capacity controls such as variable inlet or
vaneaxial fans with adjustable blade settings, minimum and maximum
performance shall be indicated along with performance for fire intermediate
settings.
1.2.3
Industrial Ventilation and Exhaust Systems
Submit drawings including fan installation drawings; duct systems [,
including welding and vehicle exhaust]; supports and anchor location and
load imposed.
1.2.4
Start-Up Tests
Submit start-up tests reports in accordance with the paragraph entitled
"Testing, Adjusting and Balancing." Submit final test report for [the]
system[s] tested, describing all test apparatus, instrumentation
SECTION 15801N
Page 10
Previous Page
