projects, a code of up to three characters within
the submittal tags may be used following the "G"
designation to indicate the approving authority.
Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are [for Contractor Quality Control
approval.][for information only. When used, a designation following the
"G" designation identifies the office that will review the submittal for
the Government.] The following shall be submitted in accordance with
Section 01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Field-assembled refrigerant piping
Control system wiring diagrams
SD-03 Product Data
Room air conditioners
Packaged terminal units
Heat pumps, air to air
Air conditioners
Filters
Thermostats
Refrigerant piping and accessories
Coatings for finned tube coils
For packaged terminal units, include indoor noise rating.
SD-06 Test Reports
Salt-spray tests
Start-up and initial operational tests
SD-07 Certificates
SECTION 15730N
Page 8
Previous Page
