2. Wet-bulb temperature entering the evaporator
cooler.
3.
Air quantity and static pressure.
4.
Motor rpm, volts, and amperes.
5. Air outlet velocity in m/s or fpm.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
ASTM INTERNATIONAL (ASTM)
ASTM A 123/A 123M
(2002) Zinc (Hot-Dip Galvanized) Coatings
on Iron and Steel Products
ASTM A 653/A 653M
(2004a) Steel Sheet, Zinc-Coated
(Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM B 117
(2002) Operating Salt Spray (Fog) Apparatus
ASTM D 1654
(1992; R 2000) Evaluation of Painted or
Coated Specimens Subjected to Corrosive
Environments
ASTM D 202
(1997; R 2002e1) Sampling and Testing
Untreated Paper Used for Electrical
Insulation
ASTM D 374
(1999) Thickness of Solid Electrical
Insulation
ASTM D 374M
(1999) Thickness of Solid Electrical
Insulation (Metric)
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 2
(2000; R
2004) Industrial Controls and
Systems:
Controllers, Contactors, and
Overload
Relays Rated Not More than 2000
Volts AC
or 750 Volts DC
SECTION 15721N
Page 4
Previous Page
