Codes for Army projects using the Resident
Management System (RMS) are: "AE" for
Architect-Engineer; "DO" for District Office
(Engineering Division or other organization in the
District Office); "AO" for Area Office; "RO" for
Resident Office; and "PO" for Project Office. Codes
following the "G" typically are not used for Navy
projects.
Submittal items not designated with a "G" are
considered as being for information only for Army
projects and for Contractor Quality Control approval
for Navy projects.
**************************************************************************
Government approval is required for submittals with a "G" designation;
submittals not having a "G" designation are for [Contractor Quality Control
approval.] [information only. When used, a designation following the "G"
designation identifies the office that will review the submittal for the
Government.] The following shall be submitted in accordance with Section
01330 SUBMITTAL PROCEDURES:
SD-02 Shop Drawings
Installation
Detail drawings as specified.
SD-03 Product Data
Spare Parts
Spare parts data for each different item of materials and
equipment specified.
SD-06 Test Reports
Testing, Adjusting, and Balancing
Test reports shall be submitted in booklet form showing all
field tests performed to adjust each component and all field tests
performed to prove compliance with the specified performance
criteria, upon completion and testing of the installed system.
Each test report shall indicate the final position of controls.
SD-10 Operation and Maintenance Data
Operation and Maintenance Instructions
[Six] [_____] complete copies of operating instructions
outlining the step-by-step procedures required for system startup,
operation and shutdown. The instructions shall include the
manufacturer's name, model number, service manual, parts list, and
brief description of all equipment and basic operating features.
[Six] [_____] complete copies of maintenance instructions listing
routine maintenance, possible breakdowns, repairs and
troubleshooting guide. The instructions shall include simplified
piping, wiring, and control diagrams for the system as installed.
SECTION 15565A
Page 5
Previous Page
