3.5
INSULATION
shall be in accordance with Section 15080A THERMAL INSULATION FOR
MECHANICAL SYSTEMS.
3.6
**************************************************************************
NOTE: Before occupancy of a facility the boilers
shall be inspected in accordance with the Code of
Boiler and Pressure Vessel Inspectors (BPV I) and
American Society of Mechanical Engineers (ASME).
Inspectors must be certified in accordance with BPV
I standards.
**************************************************************************
3.6.1
Inspection
Contractor shall inspect areas and conditions under which boiler and
location of connections to piping, equipment and supports and shall make
connection to said items utilizing field-verified dimensions. Contractor
shall notify Contracting Officer of discrepancies and shall be responsible
for ensuring that unsatisfactory conditions have been corrected in an
manner.
3.6.2
Preparation
a.
The Contractor shall coordinate the installation of equipment and
appurtenances prior to installation with other work.
b.
Contractor shall provide work required to correct situations
resulting from the Contractor's failure to coordinate with the
work of other trades, at no additional cost.
c.
Contractor shall take into consideration priority needs for
location and space of work of all trades. Failure on the part of
the Contractor to do so shall require the Contractor to remove and
relocate the work at no additional cost.
3.6.3
Installation
**************************************************************************
NOTE: Delete reference to local city and state
codes if not applicable.
**************************************************************************
3.6.3.1
Boiler
Boiler shall be installed in accordance with the manufacturer's written
instructions, [in accordance with boiler installation requirements of
local, city, state codes] and in accordance with applicable provisions of
NFPA and ASME code standards. Boiler and associated components shall be
located where indicated. Boiler shall be installed level to a tolerance of
shall be made in accordance with Section [_____].
SECTION 15561A
Page 101