Submit in accordance with Section 01781 OPERATION AND
MAINTENANCE DATA.
SD-11 Closeout Submittals
Medical air systems
Medical gas cylinder manifold systems
Piping systems diagrams
Pumps
1.4
DEFINITIONS
See NFPA 99, Chapter 2, Definitions, paragraph entitled "Definitions of
Terms Used in the Standard."
1.5
QUALITY ASSURANCE
Materials, performance, installation, and testing shall comply with NFPA 99
with modifications and additions specified herein. The NFPA 99
recommendations shall be considered by the Government as mandatory
requirements. Substitute the word "shall" for the word "should" in these
manuals.
1.5.1
Procedures and Qualifications
Submit detail field testing procedures, medical gas systems testing agency
qualifications, and welder and brazer procedures and qualifications.
Include data on test methods, testing instruments and equipment, and
instrument calibration sources and method references.
1.5.2
Qualifications of Testing Agency
Provide a testing agency for the approval of the Contracting Officer. The
testing agency shall be independent of the medical gas equipment
manufacturer and supplier. Provide names and locations of three projects
where testing of gas systems has been performed by the testing agency.
Include names and phones of owners and project supervisors for these
projects. Provide a written statement that these projects are of similar
scope of that stipulated in this specification.
1.5.3
Welder and Brazer Procedures and Performance Qualifications
Comply with AWS B2.1 and AWS B2.2.
1.5.4
Regulatory Requirements
AWS Z49.1 for brazing, soldering, and welding; 29 CFR 1910.104for oxygen;
CGA G-8.1 for nitrous oxide; and Section 15050N BASIC MECHANICAL MATRIALS
AND METHODS, paragraph entitled "Equipment Safety."
SECTION 15217N
Page 12
Previous Page
