**************************************************************************
NOTE: The following information shall be shown on
the project drawings:
1. Configuration, slope, sizes, and piping
materials for each piping system;
2.
Locations, sizes, and type of each valve;
3. Details of manholes (pits) and piping within
manholes and aboveground;
4. Capacity and efficiency of each item of
equipment;
5.
Scale ranges for pressure gages;
6. Whether piping is run aboveground on pedestals
or poles, on piers, under piers, in trenches on
piers, or in manholes;
7. Details of expansion joints and expansion loops
for aboveground piping;
8. Locations of piping, components, and systems
which must be constructed of stainless steels or
aluminum alloys; and
9. Complete details of cathodic protection systems
for buried metallic piping.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN PETROLEUM INSTITUTE (API)
API BULL 2209
(1978) Pipe Plugging Practices
API RP 1110
(1997) Pressure Testing of Liquid
Petroleum Pipelines
API RP 2003
(1998) Protection Against Ignitions
Arising out of Static, Lightning, and
Stray Currents
SECTION 15194N
Page 6
Previous Page
