MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-110
(1996) Ball Valves Threaded,
Socket-Welding, Solder Joint, Grooved and
Flared Ends
MSS SP-58
(2002) Pipe Hangers and Supports -
Materials, Design and Manufacture
MSS SP-69
(2002) Pipe Hangers and Supports -
Selection and Application
MSS SP-72
(1999) Ball Valves with Flanged or
Butt-Welding Ends for General Service
MSS SP-80
(2003) Bronze Gate, Globe, Angle and Check
Valves
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 30
Code
NFPA 31
(2001) Installation of Oil Burning
Equipment
NFPA 70
(2005) National Electrical Code
NFPA 780
(2000) Installation of Lightning
Protection Systems
SHEET METAL AND AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION
(SMACNA)
SMACNA Seismic Restraint Mnl
(1998, 2nd Ed) Seismic Restraint Manual:
Guidelines for Mechanical Systems
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC Paint 20
(2002) Zinc-Rich Primers, (Type I -
"Inorganic" and Type II - "Organic")
SSPC SP 10
(2000) Near-White Blast Cleaning
U.S. DEPARTMENT OF DEFENSE (DOD)
DOD-C-24176
(Rev B; Am 1) Cement, Epoxy, Metal Repair
and Hull Smoothing (Metric)
(Rev B; Notice 1) Coating Compound,
Bituminous, Solvent, Coal-Tar Base
MIL-C-19902
(Rev C; Notice 2) Caps, Vent, Fuel Storage
Tank
MIL-C-4556
(Rev F; Notice 1) Coating Kit, Epoxy, for
Interior of Steel Fuel Tanks
SECTION 15192N
Page 7
Previous Page
