and details.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI A13.1
(1996; R 2002) Scheme for Identification
of Piping Systems
ANSI B16.24
(1991; Errata 1991) Cast Copper Alloy Pipe
Flanges and Flanged Fittings Class 150,
300, 400, 600, 900, 1500, and 2500
ANSI B18.2.1
(1996; Errata 2003) Square and Hex Bolts
and Screws Inch Series
AMERICAN PETROLEUM INSTITUTE (API)
API 600
Petroleum and Natural Gas Industries
API RP 1110
(1997) Pressure Testing of Liquid
Petroleum Pipelines
API RP 1615
(1996; R 2001) Installation of Underground
Petroleum Storage Systems
API Std 599
(2002) Metal Plug Valves - Flanged,
Threaded and Welding Ends
AMERICAN WELDING SOCIETY (AWS)
AWS A5.8
Welding
AWS Z49.1
(1999) Safety in Welding, Cutting and
Allied Processes
ASME INTERNATIONAL (ASME)
ASME B1.1
(2001; R 2003) Unified Inch Screw Threads
(UN and UNR Thread Form)
SECTION 15192N
Page 5