Seamless Tubes (Metric)
ASTM B 241/B 241M
(2002) Aluminum and Aluminum-Alloy
Seamless Pipe and Seamless Extruded Tube
ASTM B 280
(2003) Seamless Copper Tube for Air
Conditioning and Refrigeration Field
Service
ASTM B 88
(2003) Seamless Copper Water Tube
ASTM B 88M
(2003) Seamless Copper Water Tube (Metric)
ASTM D 2513
(2004a) Thermoplastic Gas Pressure Pipe,
Tubing, and Fittings
ASTM D 2517
(2000e1) Reinforced Epoxy Resin Gas
Pressure Pipe and Fittings
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS
INDUSTRY (MSS)
MSS SP-25
(1998) Standard Marking System for Valves,
Fittings, Flanges and Unions
MSS SP-58
(2002) Pipe Hangers and Supports -
Materials, Design and Manufacture
MSS SP-69
(2002) Pipe Hangers and Supports -
Selection and Application
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 54
(2002) National Fuel Gas Code
NFPA 70
(2005) National Electrical Code
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC SP 6
(2000) Commercial Blast Cleaning
UNDERWRITERS LABORATORIES (UL)
UL Gas&Oil Dir
and Gases Equipment Directory
1.2
SUBMITTALS
**************************************************************************
NOTE: Submittals must be limited to those necessary
for adequate quality control. The importance of an
item in the project should be one of the primary
factors in determining if a submittal for the item
should be required.
A "G" following a submittal item indicates that the
submittal requires Government approval. Some
submittals are already marked with a "G". Only
delete an existing "G" if the submittal item is not
SECTION 15190A
Page 5
Previous Page
