5. Valve clearances to permit proper valve
operation in confined spaces
6. Floor stand, chainwheel operator, and power
operator locations, when required
7.
Floor stand details, when required
8. Electrical or compressed air power supply for
power operators, when required
9.
Expansion joints
10.
11.
Condensate meters
12.
Steam and air traps
13.
Unit heaters, when required
14.
Convertors, when required
15. Condensate return pumping units including pump
capacity and electrical characteristics for the pump
motor
16.
Radiation units including size and capacity
17.
Location where cold-springing is permitted
18. Connections for future equipment, when required.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AIR-CONDITIONING AND REFRIGERATION INSTITUTE (ARI)
ARI 410
(2001; Addendum 2002) Forced-Circulation
Air-Cooling and Air-Heating Coils
SECTION 15183N
Page 5
Previous Page
