SECTION 15183N STEAM SYSTEM AND TERMINAL UNITS

**************************************************************************

USACE / NAVFAC / AFCESA

UFGS-15183N (September 1999)

------------------------------

Preparing Activity: NAVFAC

Replacing without revision

NFGS of same number and date

UNIFIED FACILITIES GUIDE SPECIFICATIONS

References are in agreement with UMRL dated 23 June 2005

**************************************************************************

SECTION 15183N

STEAM SYSTEM AND TERMINAL UNITS

09/99

**************************************************************************

NOTE: This guide specification covers the

requirements for provision of a complete steam

system within the building including steam,

condensate, and terminal units for heating.

Comments and suggestions on this guide specification

are welcome and should be directed to the technical

proponent of the specification. A listing of

technical proponents, including their organization

designation and telephone number, is on the Internet.

Recommended changes to a UFGS should be submitted as

a Criteria Change Request (CCR).

Use of electronic communication is encouraged.

Brackets are used in the text to indicate designer

choices or locations where text must be supplied by

the designer.

**************************************************************************

NOTE: This guide specification does not include

steam boilers, feedwater treatment equipment, or

process steam terminal units, boiler feed, and

blow-off piping.

**************************************************************************

NOTE: The following information shall be shown on

the project drawings:

1. Extent of work including point of connection of

new work to existing

2.

General arrangement of the piping

3.

Valve locations

4. Safety valve location, setting, pipe size, and

method of termination

SECTION 15183N

Page 4