1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)
ABMA 11
(1990; R 1999) Load Ratings and Fatigue
Life for Roller Bearings
ABMA 9
(1990; R 2000) Load Ratings and Fatigue
Life for Ball Bearings
AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)
AGMA 6010
(1997; Rev F) Standard for Spur, Helical,
Herringbone, and Bevel Enclosed Drives
AGMA 6023
(1988; Rev A; R 1993) Design Manual for
Enclosed Epicyclic Gear Drives
AGMA 6025
(1998; Rev D) Sound for Enclosed Helical,
Herringbone and Spiral Bevel Gear Drives
AMERICAN PETROLEUM INSTITUTE (API)
API RP 686
(1996) Recommended Practice for Machinery
Installation and Installation Design
ASME INTERNATIONAL (ASME)
ASME B31.1
(2004) Power Piping
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 16889
(2000) Hydraulic Fluid Power - Multi-Pass
Method for Evaluating Filtration
Performance of a Filter Element
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 250
(2003) Enclosures for Electrical Equipment
(1000 Volts Maximum)
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 70
(2005) National Electrical Code
SECTION 15005A
Page 4
Previous Page
