principal dimensions, demonstrating compliance with the clearances
indicated; assemblies of hoists, trolley, and bridge drives.
Drafting quality of the shop drawings shall be equivalent to the
drafting quality of the contract drawings accompanying this
contract solicitation.
Provide integral schedule of crane components on each drawing.
Provide maximum wheel loads (without impact) and spacings that
will be imparted to the runway track beams. Indicate the crane
speeds along the runway, the trolley speeds along the bridge
girder, and the hoist lifting speeds; all speeds indicated are
speeds with hoist loaded with rated crane capacity load.
SD-03 Product Data
Crane system; G
Submit data for all system components bridge end trucks, hoist
including hoist trolley, hoist, crane controllers, couplings,
pendant push-button station, crane electrification, motors and
brakes.
Crane runway track system; G
SD-05 Design Data
Crane bridge girder; G
Crane runway track system; G
Submit manufacturer's standard published tables that verify the
crane bridge girder and crane runway track are sized in compliance
with all specification requirements. When standard published
tables are not available, provide calculations for the strength
design and deflection of the bridge beams.
If any runway track suspension device is not the track
manufacturer's standard commercial cataloged product, submit
complete design data for each instance to substantiate that the
device complies with the requirements of MMA MH27.1.
Custom runway track suspension devices;
G
SD-06 Test Reports
Hook and hook nut magnetic particle tests; G
Hoisting rope breaking strength; G
post-erection inspection report;
G
Operational test report; G
SD-10 Operation and Maintenance Data
Crane system,including runway system, Data Package 4; G
Submit data package in accordance with Section 01781, "Operation
SECTION 14637N
Page 8
Previous Page
