**************************************************************************
USACE / NAVFAC / AFCESA
UFGS-13962N (September 1999)
------------------------------
Preparing Activity: NAVFAC
Replacing without revision
NFGS of same number and date
UNIFIED FACILITIES GUIDE SPECIFICATIONS
References are in agreement with UMRL dated 23 June 2005
**************************************************************************
SECTION 13962N
CARBON DIOXIDE FIRE EXTINGUISHING (LOW PRESSURE)
09/99
**************************************************************************
NOTE: This guide specification covers the
requirements for low-pressure carbon dioxide fire
extinguishing systems.
Comments and suggestions on this guide specification
are welcome and should be directed to the technical
proponent of the specification. A listing of
technical proponents, including their organization
designation and telephone number, is on the Internet.
Recommended changes to a UFGS should be submitted as
a Criteria Change Request (CCR).
Use of electronic communication is encouraged.
Brackets are used in the text to indicate designer
choices or locations where text must be supplied by
the designer.
**************************************************************************
**************************************************************************
NOTE: If the total carbon dioxide system
requirement, including reserves, does not exceed 908
dioxide system using Section 13961N CARBON DIOXIDE
FIRE EXTINGUISHING (HIGH PRESSURE). System
requirements must conform to Unified Facilities
Critria (UFC) 3-600-01 Design: Fire Protection
Engineering for Facilities.
**************************************************************************
**************************************************************************
NOTE: If there are questions concerning system
design, consult with the Engineering Field Division,
Naval Facilities Engineering Command, Fire
Protection Engineer.
**************************************************************************
**************************************************************************
NOTE: Project drawings should indicate the
following information:
SECTION 13962N
Page 4