including structural design of antenna supporting
towers if towers are required.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI C80.1
(1994) Rigid Steel Conduit - Zinc Coated
ANSI C80.3
(1994) Electrical Metallic Tubing, Zinc
Coated
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA/TIA-222
(1996) Steel Antenna Towers and Antenna
Supporting Structures
FM GLOBAL (FM)
FM P7825
(2003) Approval Guide
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
ANSI C62.11
(1999) Metal-Oxide Surge Arrestors for AC
Power Circuits (>1KV)
IEEE C62.41
(1991; R 1995) Recommended Practice for
Surge Voltages in Low-Voltage AC Power
Circuits
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA ICS 6
(1993; R 2001) Industrial Control and
Systems: Enclosures
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 111
(2001) Stored Electrical Energy Emergency
and Standby Power Systems
NFPA 12
(2005) Carbon Dioxide Extinguishing
NFPA 1221
(2002) Installation, Maintenance and Use
SECTION 13853N
Page 6
Previous Page
