2.2.25.1
Enrollment Center Accessories
A steel desk-type console, a swivel chair on casters and equipment racks
shall be provided. The console shall be as specified in EIA ANSI/EIA-310-D
and as shown. Equipment racks shall be as specified in EIA ANSI/EIA-310-D
and as shown. All equipment, with the exception of the printers, shall be
rack mounted in the console and equipment racks or as shown. The console
and equipment racks and cabinets shall be color coordinated. A locking
cabinet approximately 1.8 m 6 feet high, 900 mm 3 feet wide, and 600 mm 2
feet deep with 3 adjustable shelves, and 2 storage racks for storage of
disks, tapes, printouts, printer paper, ribbons, manuals, and other
documentation shall be provided.
2.2.25.2
Enrollment Center I.D. Production
The enrollment center shall be equipped with a high-resolution digital
camera structurally mounted, or provided with a reliable tripod. The
camera model shall be as recommended by the manufacturer of the ESS. The
camera and digital video capture card shall be commercially available, off
the shelf components. A lighting system shall be designed and provided by
the Contractor sufficient for quality, still-video capture. The enrollment
center shall be equipped with a die-sublimation [_____] printer capable of
printing directly to the access control or I.D. credential. Printer
ribbons and other printing supplies shall be provided to complete the
initial enrollment by 200%. The quantity of credentials is a separate
issue and will be as shown.
2.2.26
Secondary Alarm Annunciation Site
**************************************************************************
NOTE: Show secondary alarm annunciation console on
the drawings. Eliminate this paragraph if the
system does not have secondary alarm annunciation
console.
**************************************************************************
Secondary alarm annunciation workstation shall be located as shown.
Hardware and software needed for the secondary alarm annunciation
workstation shall be provided. [The secondary alarm annunciation
workstation shall allow the operator to duplicate all functions of the main
operator interface, and shall show system status changes.] [The secondary
alarm annunciation console shall display alarms or system status changes
only.]
2.3
CENTRAL STATION SOFTWARE
Software shall support all specified functions. The central station shall
be online at all times and shall perform required functions as specified.
Software shall be resident at the central station, regional server, and/or
the local processor as required to perform specified functions.
2.3.1
System Software
System software shall perform the following functions:
a.
Support multi-user operation with multiple tasks for each user.
b.
Support operation and management of peripheral devices.
SECTION 13720A
Page 41
Previous Page
