incorporated within that zone. As the test in that zone is proceeding,
modifications or adjustments are prohibited. If, subsequent to the test, a
modification or adjustment is necessary, retest the zone in the presence of
the authorized representative of the [IDS Engineer] [Contracting Officer].
Test other components individually within each subsystem. Component or
subsystem failure shall require retesting after needed repairs or
adjustments have been accomplished. For testing purposes, computers, data
managers, graphic displays, control units gathering panels and
nonsensor-related cabling will be considered part of the central alarm
reporting and display console. The integrated system test shall commence
only when subsystem tests have been completed. In the interest of
efficiency, major elements in a subsystem may be tested even if corrections
for minor elements have not been completed. Testing of minor elements will
be accomplished upon completion. Only when subsystem elements have been
tested can subsystem be certified as complete. [When testing is complete,
test plan, together with procedures and data sheets, shall become the
substance of the final acceptance report. Test report documents and
verifies the Government's acceptance and approval of equipment and
installation required by the contract.]
3.3.2.3
Fuses and Lamps
Replace blown fuses and burned out lamps during testing and will have on
hand, prior to scheduling tests, not less than six spare lamps and fuses
for each type, size, and rating of fuses and lamps used in the equipment
provided under this section. Turn spare fuses and lamps not used during
testing over to the Contracting Officer.
3.3.2.4
Training Operating and Maintenance Personnel
Furnish instruction for operating staff in system operation and operator
troubleshooting and preventive maintenance procedures. Instruction shall
consist of [3] [_____] man-days, 8 hours per day, and shall be held during
normal duty hours. Commence instruction after system is fully operational,
and complete instruction prior to system acceptance and turnover to the
Government. [Furnish maintenance instruction for Government maintenance
personnel in adjustment, operation, and maintenance of [each system
equipment] [_____]. Attendance at equipment manufacturer's recommended
maintenance training schools may be substituted for this training. Costs
associated with such schooling, less travel and per diem, shall be borne by
the Contractor. Complete maintenance instruction prior to system
acceptance and turnover to the Government.]
-- End of Section --
SECTION 13703N
Page 70
Previous Page
