sanding, scraping, needle gunning, abrasive
blasting, high temperature removal, etc., of
lead-based paint/paint with lead materials may
result in lead exposures in excess of OSHA limits.
Therefore, personal protective equipment should be
used and controls implemented. Institute worker
protection controls as indicated in 29 CFR 1926.62
and herein. Also, some work practices are prohibited
for LBP/LBP hazard abatement (e.g., machine sanding,
abrasive blasting) unless used with HEPA exhaust
controls (see 40 CFR 745.227).
**************************************************************************
**************************************************************************
NOTE: Drawings should indicate the location, extent
and condition of the LBP/PWL to be
removed/controlled. Clearly indicate if the LBP/PWL
is to be removed to the substrate.
**************************************************************************
PART 1
GENERAL
1.1
REFERENCES
**************************************************************************
NOTE: Issue (date) of references included in
project specifications need not be more current than
provided by the latest guide specification. Use of
SpecsIntact automated reference checking is
recommended for projects based on older guide
specifications.
**************************************************************************
The publications listed below form a part of this specification to the
extent referenced. The publications are referred to within the text by the
basic designation only.
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI Z88.2
(1992) Respiratory Protection
U.S. DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT (HUD)
HUD 6780
(1995; Errata Aug 1996;Rev Ch. 7 - 1997)
Guidelines for the Evaluation and Control
of Lead-Based Paint Hazards in Housing
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
29 CFR 1926.103
Respiratory Protection
29 CFR 1926.21
Safety Training and Education
29 CFR 1926.33
Access to Employee Exposure and Medical
Records
29 CFR 1926.55
Gases, Vapors, Fumes, Dusts, and Mists
29 CFR 1926.59
Hazard Communication
SECTION 13283N
Page 5
Previous Page
